TFT表示パネルのインターフェースとその長所・短所
TFT display are widely used in a variety of electronic devices, including smartphones, tablets, laptops and industrial control equipment. In order to connect the display with the motherboard or other signal sources, various interfaces are widely used. This article introduces several common TFT display panel interfaces, including SPI interface, SPI+RGB interface, RGB interface, MCU interface, MIPI interface, LVDS interface and eDP interface, and analyzes their advantages and disadvantages, as well as application scenarios.
1.SPI interface
SPI is a synchronous serial communication interface widely used for data transmission between microcontrollers and displays.
利点
- High-speed transmission: Compared with other serial interfaces, SPI offers higher transmission speeds.
- Simple connection: Only four wires (MOSI, MISO, SCK, CS) are required, making the connection simple.
- Full-duplex communication: data can be sent and received at the same time.
欠点
- Limited bandwidth: not suitable for high resolution display, mainly used for low resolution display.
- Short-distance transmission: suitable for short-distance connection, long-distance transmission is not effective.
2. SPI+RGB interface
SPI+RGB interface combines the advantages of SPI and RGB interfaces and is usually used for display applications that require simultaneous transmission of commands and data.
利点
- High flexibility: SPI is used to transmit command and control signals, while RGB is used to transmit image data.
- Suitable for high resolution: More suitable for high resolution display than pure SPI interface.
欠点
- Increased complexity: need to deal with two different interface signals, more complex design and implementation.
- Higher cost: Higher cost of hardware and software than pure SPI interface.
3. RGB interface
RGB interface is an interface that transmits the three basic color signals of red, green and blue separately, usually used in LCD monitors and TVs.
利点
- Direct drive: can directly drive the LCDパネル, without complex conversion.
- High compatibility: applicable to a variety of different display panels.
欠点
- More signal lines: requires multiple signal lines, higher design complexity.
- Weak anti-interference ability: easy to be interfered when transmitting over long distances, with high signal attenuation.
4. MCU interface
MCU interface is a kind of interface between microcontroller and display, usually used for small-size display module.
利点
- Simple and easy to use: relatively simple design and realization, suitable for small size and low-cost display applications.
- Low power consumption: suitable for low-power applications, especially battery-powered devices.
欠点
- Limited bandwidth: not suitable for high resolution and high refresh rate displays.
- Slower speed: slower data transfer speed, not suitable for fast update display content.
5. MIPI DSI interface
MIPI DSI is a high-speed serial interface designed for low-power and high-resolution displays, widely used in mobile devices.
利点
- High bandwidth: Supports high resolution and high refresh rate displays.
- Low power consumption: suitable for battery-powered mobile devices.
- Flexibility: Supports multiple display modes and data formats.
欠点
- Short transmission distance: usually only suitable for short distance connection within the device.
- Complexity: Relatively complex design and debugging, requires specialized chip and driver support.
6. LVDS interface
LVDS is a differential signaling technology widely used in LCD monitors and other video devices.
利点
- High bandwidth: Supports high resolution and high refresh rate display.
- Low power consumption: suitable for low-power applications.
- Long transmission distance: maintains good signal integrity over longer cables.
欠点
- Complex interface: requires multiple signal lines, higher design complexity.
- Higher cost: Higher cost compared to other interfaces.
7. eDP interface
eDP is the embedded version of DisplayPort, designed for embedded display applications. It uses differential signaling to support high resolution and high refresh rate displays.
利点
- High bandwidth: Supports high resolution and high refresh rate displays.
- Simplified design: Compared with LVDS, fewer signal lines are required, making the design simpler.
- Low power consumption: suitable for portable devices.
欠点
- Limited transmission distance: usually suitable for short-distance connection within the device.
- Compatibility issues: less compatible than traditional display interfaces.
を要求すべきである
Different display module interfaces have their own advantages and disadvantages, and are suitable for different application scenarios: MIPI DSI and eDP are suitable for mobile devices and laptops, LVDS is suitable for industrial displays and in-vehicle displays, RGB interfaces are suitable for all kinds of display panels, MCU interfaces are suitable for small-sized displays, SPI interfaces are suitable for low-resolution and low-power display applications, and SPI+RGB interfaces are suitable for applications that require high-resolution displays and low-power displays. SPI interface is suitable for low-resolution and low-power display applications, while SPI+RGB interface is suitable for applications that require high-resolution display and complex command control. When choosing display module interface, it should be considered according to the specific needs and application environment.
